5 House Washing Mistakes Homeowners Need to Avoid

5 House Washing Mistakes Homeowners Need to Avoid

 

Is your house looking a little rundown? If your home can use an exterior makeover, you’re probably thinking about renting or borrowing your friend’s pressure washer to give it a good clean.

How difficult could it be, you think to yourself. With a little house washing, your home will be free of mould, grime, and stubborn dirt.

You’re right—it will certainly make your home look like new again. Unfortunately, though, using a pressure washer to clean the outside of the home isn’t as easy as it may seem. In fact, without proper training and knowledge, you could end up making mistakes that will require expensive repairs.

Not convinced? Here are the most common house washing mistakes homeowners make—and you should avoid.

Using the Wrong Equipment

If you want to perform a professional job on your home, you’re going to need a professional-grade pressure washer. Those found in home improvement stores are often too ineffective for such a big job.

Not sure if the pressure washer you want to use is up to the task? Check its output, which should be over four gallons of water per minute. Any lower than this and the pressure washer simply won’t be able to get rid of the tough grime buildup and stubborn stains you’re looking to clean up.

Over-Spraying

If you’re using a low-grade pressure washer and it doesn’t get rid of the mould and dirt effectively, your first instinct may be to keep spraying water on the same spot for a long period of time, thinking that will work. Unfortunately, doing so can cause significant damage, which will require repairs afterward.

Using Too Much Pressure

You may think the more power, the better when pressure cleaning. You might get too close to spray a particularly dirty area or you might use too much pressure on more sensitive materials, such as wood, masonry, or brick. Extremely high water pressure can cause damage by blasting away pieces of your house, so this mistake is best avoided.

Using the Wrong Solution

Did you know you could make your mould problem worse? If you’re not using the right water-to-cleaner ratio, this can occur. If you add too much water to the mix, not only will you reduce its cleaning ability, but you could also end up spreading mould spores rather than removing them.

In addition, the landscaping around your home can actually be harmed by power washing if you use the wrong cleaning products. Some cleaners, once dried on leaves and plants, can burn the foliage and leave brown or white patches.

Using the Wrong Cleaning Technique for House Washing

By and large, the most common mistake homeowners make is using the wrong cleaning technique. If you want an even clean—and to preserve the surfaces you’re cleaning—you need a very specific sweeping action.

As you can see, DIY power washing can be a challenge. If you’re not careful, you could end up making some of these critical and costly mistakes. You may cause damage, spread mould, or be ineffective in cleaning the surfaces.

That’s why it’s best to hire experienced exterior cleaning experts with the professional-grade equipment, the correct cleaning solutions, and the proper cleaning techniques to get the job done right.

These professionals deal with power washing for residential homes in the Newcastle and Hunter Valley, NSW, Australia, area on a daily basis. They know the small details most homeowners do not. They will ensure your home is clean in no time and you won’t have to risk causing damage. You’ll be able to save yourself money, headaches, and frustration.

MaintainX is here to help!
Get a FREE, no obligation quote at your home or workplace
Contact us by phone or start a live chat with our friendly team
AVAILABLE 24 HOURS FOR ALL WORK

Mould Removal Newcastle: 7 Mistakes to Avoid

Mould Removal Newcastle: 7 Mistakes to Avoid

Nobody wants mould in their house. It’s a dangerous health hazard that can trigger asthma and allergies.

Mould Removal Newcastle_ 7 Mistakes to Avoid

 

Rain, warm temperatures, and high humidity, which Australians know all too well, create the perfect conditions for mould to grow and spread.

If you’ve noticed mould growing in or on your home, it’s best to remove it right away. However, it’s important to know there are right ways and wrong ways to get rid of it.

Before you tackle mould removal in Newcastle, learn about which mistakes you should avoid. Attempting to remove it without knowing the proper protocols can actually worsen the problem and cause additional health hazards to you and your family.

  1. Only Eliminating the Mould You Can See

Of course, if you see mould, you should kill it, but that doesn’t mean there isn’t more spreading in places you can’t see. Only treating the outside of walls or the top of your roof is a temporary measure that won’t really solve the issue.

It’s important to conduct a thorough inspection before beginning the clean-up process.

  1. Not Wearing Protective Gear

You want to get rid of mould in your Newcastle home because it’s a health hazard. Because of the risks involved, you shouldn’t clean up without wearing the proper protective gear. During the clean-up process, you could make the spores go airborne, which you may then inhale.

  1. Cleaning Porous Items

Mould on porous items, such as wood, carpets, and curtains cannot be effectively removed. The mould will seep into the material’s pores. When it comes to these types of items, it’s best to throw them out and replace them. Otherwise, the problems will persist. The water in the cleaning solution you use will simply be absorbed in the material, which will exacerbate the problem and help the mould grow.

  1. Using Bleach

Many homeowners believe bleach effectively kills mould, but this is a myth. It won’t work—the mould will simply come back in three to four months. When you use bleach, the mould will turn white or clear, but it won’t be killed. It will continue to grow.

And, at the same time, you risk inhaling airborne mould spores as well as bleach fumes.

What should you use instead? Borax, a laundry product, is actually the best mould cleaner. Mix it with hot water and use the mixture on the affected area. Scrub and wipe dry.

  1. Using Mould-Resistant Paint

Simply painting over the affected area with mould-resistant paint seems to be an easy solution. However, it’s no solution at all. The mould won’t be eradicated—it will continue to spread under the layer of paint.

  1. Not Containing the Area

Mould removal in your Newcastle home can be a tricky task. Mould spores, after all, are small and can spread quite easily. During the clean-up process, you could end up making the mould spread to other areas of your home through cross-contamination.

That’s why it’s so important to set up the proper containment of the area before you start. You want to solve the problem, not make it worse.

  1. Trying to Fix the Problem on Your Own

All of these problems can occur if you’re attempting to fix the issue on your own without the proper knowledge and experience. Often, it’s best to seek out the help of professionals.

They will inspect your home, use the right cleaners and protective gear, set up effective containment, and dispose of materials correctly to ensure the mould does not spread. If you’re dealing with a minor issue on a non-porous surface, it’s possible to do it yourself, but the problem may be worse than you realize. A reputable cleaning company can ensure your problem is gone—for good.

MaintainX is here to help!
Get a FREE, no obligation quote at your home or workplace
Contact us by phone or start a live chat with our friendly team
AVAILABLE 24 HOURS FOR ALL WORK

House Washing Newcastle: 3 Tips to Consider for Your New Home

House Washing Newcastle: 3 Tips to Consider for Your New Home

Congratulations on buying a new home in Newcastle, NSW Australia!

3 Tips to Consider for Your New Home

Of course, the home is new to you, but it’s likely a few years—or decades—old. Now that you’re all unpacked and organised, it’s time to start cleaning so you can make your new house feel like a home.

 

You’ve cleaned vigorously indoors, but have you considered the exterior of your house? It’s very likely that the past homeowners never cleaned it, or didn’t clean it often enough. If you look closely, you might notice grime buildup on the walls, stains on the driveway, or even mould in your gutters.

 

Of course, you want to take care of your new house. You want to maintain it so it’ll look great for years to come. You take pride in homeownership.

 

So, it’s time to tackle the house washing of your Newcastle home. Here are some tips to get the job done right.

 

  1. Learn How to Use a Pressure Washer Properly

A pressure washer is a key tool you’re going to need when washing the exterior of your home. Although it might seem simple—just point and spray—there are actually many details you need to get right in order to effectively clean the home and avoid causing any damage.

 

First, you’ll need to ensure you’re using a professional-grade power washer. Many of the ones you can buy at the local hardware store will be ineffective for such a big job. Further, you’re going to need to get the pressure and the distance just right as to avoid doing harm to the materials. You’ll also need to consider which cleaner you’re going to use (non-toxic is best) and which solution-to-water ratio you need.

 

In addition, using the correct sweeping technique will ensure you get an even clean, and you will also need to be more careful around sensitive materials, such as stucco, wood, and masonry, or costly damage could occur.

 

Tip?

It’s always best to start with a lower pressure and work your way up. Use a 40-degree nozzle to begin with. Start spraying at a downward angle, keep the hose moving at all times, and test a small section of the home first. You should also avoid cleaning windows with a pressure washer—it’s easy to break the glass if you’re not careful. If your new house is made of stucco or brick or has wood shingles, it may be best to avoid the pressure washer altogether.

 

When done correctly, pressure cleaning can not only make the exterior of your home look like new, but it can also be used to clean up dirt and grime on your fence, shed, deck, driveway, and walkways as well. The difference will be astounding.

 

  1. Cleaning Those Gutters

If the previous homeowners neglected the gutters, you will have a big job ahead of you. Not only will there be waste in there, but the gutters may be mouldy as well. But it’s important to clean your gutters to ensure they function properly and don’t become a fire hazard from all the dry leaves.

 

To eliminate the mould, you’re going to require a special chemical that’s going to be able to kill the spores. Not only will this remove the mould, but it will also extend the lifespan of your gutters.

 

  1. Call in the Professionals for house cleaning in Newcastle

As you can see, house cleaning in Newcastle can be a tough job. If you don’t have the right equipment and cleaning supplies, you could have trouble removing stubborn dirt and stains, as well as killing mould spores.

 

Without the proper knowledge and experience, you could also cause damage to your new home. That’s why it might be best to consider hiring professional exterior cleaning experts to pressure wash and clean your gutters.

MaintainX is here to help!
Get a FREE, no obligation quote at your home or workplace
Contact us by phone or start a live chat with our friendly team
AVAILABLE 24 HOURS FOR ALL WORK